Container Poultry Houses and Laying Units

Quick answer

A container poultry house is a steel unit fitted out for keeping poultry, with ventilation, perching, nesting and a controlled interior. Units are supplied unit-only, delivered port-to-port on FOB terms.

• Ventilated interior with controlled airflow
• Nesting and perching fitted to your flock size
• Insulated option for temperature stability
• Unit-only pricing, FOB delivery worldwide

Get your exact quote on WhatsApp

Why a solid unit beats a wooden shed

Poultry housing fails in predictable ways. Wooden sheds harbour mites and are difficult to disinfect properly between flocks. Lightweight structures let temperature swing, which stresses birds and cuts production. Rodent access undermines biosecurity.

A steel shell addresses all three. It can be cleaned and disinfected thoroughly because its surfaces do not absorb. Its mass and insulation hold temperature steadier through the night. Its construction is harder for rodents to get into than a timber shed with gaps.

The relocatable quality is the fourth advantage. A unit can be moved to fresh ground rather than the ground being rested around a fixed shed, which is the standard practice in pasture-based systems.

Ventilation is the whole game

Birds produce moisture and heat continuously, and stale air carries ammonia from their droppings. Ammonia at even modest levels damages the respiratory tract and makes the flock susceptible to everything else.

Ventilation has to do two contradictory things: move enough air to clear moisture and ammonia, and avoid draughts at bird level. High-level outlets let warm, moist air leave. Low-level inlets, or vents above head height, admit fresh air without it hitting the birds.

In a warm climate ventilation is mostly about removing heat. In a cold climate it is mostly about removing moisture while conserving heat, which is where insulation earns its place.

Nesting, perching and floor

Laying hens need nests that are dark, private and off the floor. Nest boxes along a wall, at a comfortable height and with a lip to keep the litter in, suit most flocks. The number of nests is set by the number of hens rather than by floor area.

Perches are needed by most breeds for roosting and are also what lets birds get off cold or wet ground. Running poles at a comfortable height, with room for the birds to get their feet right round, is the standard arrangement.

Floor covering depends on the system. Deep litter works well in a solid unit, while a slatted area can be included where droppings need to fall clear. The floor should be sealed so that it can be washed between flocks.

Feed, water and biosecurity

Feed and water need to be inside the protected space or on a covered run. Feed outdoors attracts wild birds and rodents, and both carry disease. Water lines need protection from freezing in a cold climate and from overheating in a warm one.

Biosecurity is largely about traffic. A unit with a clear entrance, a footbath at the door and a store for clean boots and equipment separates clean from dirty. That separation is easier to maintain where the housing is a single dedicated building rather than part of a shared shed.

Where the unit is used commercially, the local animal health requirements should be confirmed before the unit is specified, since some requirements affect the layout.

Delivery and payment

Units are delivered port-to-port under FOB terms. Siting on a level, well-drained base, the electrical connection and any local approval are arranged by the buyer on arrival.

Payment is by bank transfer in full, due in full before production. There is no online checkout; every order begins with a written quotation.

Send your flock size, whether you are housing layers or rearing birds, and your nearest port for a quoted specification.

Shade, shelter and the run

The unit is the shelter, but the birds also need somewhere to range. A covered run attached to the unit gives shade and keeps feed dry, and a run that can be moved with the unit is what makes the whole setup relocatable.

Shade matters more than many first-time keepers expect. Birds do not sweat, and a run with no shade in summer becomes a heat stress problem. The unit gives shade on one side, and a roofed section of run gives it on the other.

The ground around the unit should be well drained. Standing water in a run is how foot problems start, and a unit sited on a low or waterlogged patch will be a problem every winter.

Cleaning between flocks

The value of a steel shell shows most clearly at the changeover between flocks. Droppings, litter, feathers and dust all have to be removed, and the surfaces then washed and disinfected before new birds arrive.

A sealed floor and smooth walls make that possible. Litter can be scraped out, the floor hosed, and surfaces wiped with a disinfectant that would be absorbed by timber. That thoroughness matters most where disease pressure is high.

Allowing a clean, empty period between flocks is standard practice, and a unit that can be properly cleaned in a day rather than a week makes that easier to keep to.

Frequently asked questions

How is payment handled?

Payment is by bank transfer in full before production.

How are units delivered?

Units ship folded and are delivered port-to-port (FOB). You arrange local transport from the port to your site.

Can I order more than one unit?

Yes. Multi-unit orders ship together, which lowers the freight cost per unit.

Get your exact quote: message us on WhatsApp.

Tariffs, duties and shipping are extra.